Elrs
Les 10 meilleurs produits en juillet 2025
Dernière mise à jour :
26 juillet 2025
BETAFPV
BETAFPV ExpressLRS 2.4G OpenTX Mini Nano Récepteur Performances à Longue portée à taux de rafraîchissement élevé pour Drone de Course FPV
Livraison gratuite
99
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT
▼ Montrer plus
▲ Montrer moins
【ExpressLRS】 ExpressLRS est un lien RC open source pour les applications RC, basé sur le matériel Semtech Lora SX127x ou SX1280 pour RX et TX respectivement. Cela fait d'ExpressLRS l'une des liaisons RC les plus rapides disponibles tout en offrant des performances à longue portée.
【ExpressLRS Receiver】 Le récepteur Nano BETAFPV est basé sur le projet ExpressLRS, un lien RC open source pour les applications RC qui vise à obtenir les meilleures performances de lien possibles en termes de vitesse, de latence et de portée pour le module ELRS TX ou la baie Nano, etc.
【Protocole série Crossfire】 ExpressLRS utilise le protocole série Crossfire (protocole AKA CRSF) pour communiquer entre le récepteur et la carte contrôleur de vol. Assurez-vous donc que votre carte contrôleur de vol prend en charge le protocole série CRSF. La configuration du protocole CRSF peut être consultée à la quatrième page du manuel.
【Taille Nano】Ce récepteur ne pèse que 0,7 gramme et le volume est de 12 mm * 19 mm, ce qui est très approprié pour Tiny whoop en raison de sa taille ultra légère et Nano.
【Configuration & Bind】 Le récepteur Nano peut entrer dans l'état de liaison par mise sous/hors tension trois fois. La méthode de liaison spécifique est accessible. Envoyez-nous simplement un e-mail pour les pages d'assistance.
22,99 € SUR AMAZON
BETAFPV
BETAFPV ELRS V3 LiteRadio 2 SE Télécommande Radio, Soutien Configurateur V2, Mise à Jour du Micrologiciel, Simulateur FPV, Chargement USB-C, Calibrage Joystick, pour Drone FPV RC Quad -Mode 2
25% Réduction
Livraison gratuite
96
QUALITÉ SUPÉRIEURE
VOIR SUR AMAZON
Amazon.fr
#2
▼ Montrer plus
▲ Montrer moins
BETAFPV Configurator V2 Supported: It is an open-source configurator tool tailored for BETAFPV drones and remote controls. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Officially released in Dec 2024, supports Windows/macOS/Linux (Debian family) platforms
Firmware Update Supported: BETAFPV has released the new firmware for LiteRadio series remote controller. Pilots can flash LiteRadio 2 SE radio transmitter with firmware version V2024.11.8 or later, a significant upgrade will be unlocked. For How to Update, please refer to user manual
FPV SIM&Platform Support: It has the function of FPV simulator, which can act as a USB Joystick, suitable for FPV starters to play FPV SIM like VelociDrone, Liftoff, TRYP, DRL, DJI etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 2 SE ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight SIM on Win system and elevate your virtual flying experience to new heights(Need to Update the Latest Firmware First)
ELRS Firmware Version: LiteRadio 2 SE Transmitter's firmware is ELRS V3, it can't be bound with your equipment with ELRS 2.X version. Please make sure the receiver or the TX module has same ELRS firmware version and then could be bound together. If you don't know the ELRS firmware version, please email us via Amazon
Built-in Battery&Charging Module: LiteRadio 2 SE radio transmitter remote controller has a built-in 1000mAh 1S battery, which can use up to 8 hours. Comes with a built-in charging module, supports USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. While it needs to be re-charged (when the voltage is lower than 3.5V), the LED will turn red first, then it will turn blue and flash slowly
44,99 € SUR AMAZON
Uqezagpa
Uqezagpa ELRS Récepteur longue distance 2,4 G 915/868 MHz pour Mobula 7 Mobula 6 longue distance
93
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#3
▼ Montrer plus
▲ Montrer moins
Convient pour les UAV à distance FPV tels que Mobula 7 et Mobula 6.
Permet de contrôler à distance les drones et de fournir une connexion plus stable.
Récepteur longue distance, prenant en charge les fréquences de 2,4 GHz et 915/868 MHz.
Design petit et léger qui n'occupe pas trop d'espace d'installation.
La technologie avancée 2,4 GHz assure une transmission stable.
45,11 € SUR AMAZON
BETAFPV
BETAFPV ELRS V3 LiteRadio 3 RC Radio Transmitter with Nano Bay for External TX Module, Support FPV Simulator BETAFPV Configurator V2 Firmware Update Joystick Calibration for FPV Drone Quad - Mode 2
29% Réduction
Livraison gratuite
90
QUALITÉ DISTINGUÉE
VOIR SUR AMAZON
Amazon.fr
#4
▼ Montrer plus
▲ Montrer moins
BETAFPV Configurator Supported: The BETAFPV Configurator V2 is an open-source configuration tool tailored for BETAFPV drones and remote controls that support macOS Linux (Debian family) platforms. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Please DO NOT power on the transmitter before connecting it to the PC. Doing so will render the USB port non-functional
Firmware Update Supported: BETAFPV has released the new firmware for the LiteRadio series remote controller, which brings new features and improvements. Pilots can flash the latest firmware to enjoy the new functions. Please confirm the firmware version first, and refer to the user manual in the package to upgrade the latest firmware if your transmitter has the older firmware version
System&Platform Supported: Experience the ultimate flexibility with LiteRadio 3, your gateway to popular FPV simulators like VelociDrone, Liftoff, TRYP, DRL, DCL, DJI, etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 3 ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight Simulator on the Windows system and elevate your virtual flying experience to new heights
Built-in Battery&Charging Module: Equipped with a built-in 2000mAh 1S battery and built-in charging module, you can charge by USB and it can work up to 15 hours without an external module. Meanwhile, it designed a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously
External TX Module: LiteRadio 3 features a new design with a nano bay, it supports the external TX module(ELRS/CRSF/TBS protocol only), please note that the external module should support the CRSF protocol when using other brands, if you are ready to install the TBS external nano module, the case size of the nano module should be 64*42*25mm
Newly Designed: LiteRadio 3 radio transmitter comes with ergonomic stick ends, the stick is detachable, anti-slip, and adjustable in height, it has long longevity of up to 120k times rotations. The potentiometer is positioning accuracy and fast response sensitivity, bringing a good experience to your flight
54,99 € SUR AMAZON
BETAFPV
BETAFPV ELRS 2.4GHz Micro Receiver Support 5 CH PWM Outputs Failsafe Function with IPEX MHF T Antenna Compatible for Multirotors Fixed-Wing Helicopters RC Cars Boats Easy to Install Plug and Play
Livraison gratuite
84
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#5
▼ Montrer plus
▲ Montrer moins
【PWM Output】BETAFPV ELRS Micro receiver is the first ELRS receiver with PWM output on BETAFPV. Supports 5 channels PWM outputs. It also supports flash CRSF output firmware, in this case CH2 corresponds to TX and CH3 corresponds to RX
【Application】ELRS micro receiver adapts for multiple types of models like fixed-wing, helicopters, RC cars, boats and etc.
【Failsafe Function】When the connection or signal is lost between the radio transmitter and receiver, the failsafe function will adjust all the channels to the failsafe values set by the users, maximum keep safety and prevent from flying away. It's necessary to set up failsafe values properly if you are not using a flight controller, such as RC fixed-wing
【Weight&Size】Weighing about 4.5g with an antenna and with the sizes of 19mm*32mm*9mm (without antenna). It means that an FPV drone can not afford to carry.
【Plug &Play】With the plug-and-play connect ports, micro receiver is very easy to use and does not need to solder
16,99 € SUR AMAZON
BETAFPV
BETAFPV ExpressLRS Lite Receiver with Flat SMD Ceramic Antenna High Refresh Rate Long Range Performance Compatible for 65/75/85mm FPV Racing Whoop Drone V1.2
Livraison gratuite
80
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#6
▼ Montrer plus
▲ Montrer moins
Updated: Building on the open-source ExpressLRS framework – renowned for delivering ultra-low latency, blistering speeds, and exceptional range – the upgraded Lite Receiver flat antenna V1.2 now features an extra-thin 3mm board, an ultra-lightweight 0.46g design, and enlarged soldering pads. Optimised impedance matching elevates signal reliability and sensitivity, enabling 300m range at 25mW transmitter power and up to 1000m at 50mW, pushing the boundaries of long-range potential in micro-sized receivers
Enhanced Signal Reliability & Sensitivity: The flat antenna V1.2’s optimised impedance matching unlocks a transformative leap in signal reliability and sensitivity. Where the original flat antenna V1.1 achieved 500-600m at 50 transmitter power/500Hz, the V1.2 now delivers a robust 1000m under identical conditions, alongside superior signal consistency. This precision-tuned design minimises packet loss during high-speed manoeuvres and enhances low-power efficiency, ensuring crisp responsiveness at 25 (300m range) and unwavering stability at max output
Lightweight Design, Simplified Installation: In response to community feedback, the flat antenna V1.2 now features enlarged soldering pads designed to simplify installation and reduce errors – a critical upgrade for both novices and seasoned builders. Combined with a 13.2% weight reduction (now just 0.46g), the updated design retains its compact footprint while shedding unnecessary mass, freeing up crucial weight budgets for performance-focused builds
Flat Antenna: The Lite Receiver flat antenna V1.2 boasts a 3mm ultra-thin board and 0.46g lightweight design, perfect for space-limited drones. Its low-profile, crash-resistant build offers greater durability than traditional tower antennas. The V1.2’s optimised impedance matching enhances signal reliability and sensitivity, extending its range to 1,000m. This upgrade focuses on refining the flat antenna’s crash resistance, providing pilots with unmatched range and durability in a compact form
Note: Now the firmware version of Lite Receiver flat antenna V1.2 is ELRS 3.3.0; ELRS Innovative team has officially released version 3.3.0. If you want to flash official ELRS firmware, please download the latest ExpressLRS-Configurator or read our manual for flashing it. Significantly, the TX module and receiver have to be in the same ELRS version, otherwise, the frequency cannot match successfully
Configuration & Bind: ExpressLRS uses the Crossfire serial protocol (AKA CRSF protocol) to communicate between the receiver and the flight controller board. So make sure your flight controller board supports the CRSF serial protocol. For more binding details, please refer to manual or the product picture
16,99 € SUR AMAZON
JUYAXIN
JUYAXIN Récepteur 2,4 GHz adoptant la technologie ExpressLRS ELRS 2,4 GHz à faible latence, pour plusieurs appareils hautes performances
78
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#7
▼ Montrer plus
▲ Montrer moins
Haute fréquence de rafraîchissement : prend en charge une fréquence de rafraîchissement élevée pour une image plus lisse et plus détaillée.
Transmission à faible latence : adoptant la technologie ExpressLRS ELRS 2,4 GHz, la latence de transmission est extrêmement faible, offrant une réponse plus rapide.
Forte capacité de réception : réception stable pour assurer la précision et la fiabilité de la transmission d'informations.
Compatibilité de plusieurs appareils : pour les contrôleurs larges et les contrôleurs de vol, offrant une large applicabilité.
Installation simple, pratique pour les utilisateurs à utiliser et à régler.
41,52 € SUR AMAZON
Denash
Récepteur ELRS, Récepteur ELRS FPV 915 MHz Module ES900TX Longue Portée Faible Latence pour Drones Jumper T12 T16 T18 pour Drone Quadricoptère de Course FPV
Livraison gratuite
74
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#8
▼ Montrer plus
▲ Montrer moins
Avec ventilateur : le module ELRS ES900TX 915 MHz est livré avec un ventilateur 2006, qui fonctionne automatiquement lorsque la puissance TX est de 250 mW, prolongeant ainsi sa durée de vie.
Compatibilité étendue: Compatible avec la plupart des télécommandes Opentx, particulièrement adapté aux télécommandes Radiomaster TX16S et aux télécommandes de la série Jumper T12 T16 T18, essentiellement plug and play.
Fonctionnement stable : nous avons spécialement personnalisé un dissipateur thermique et réservé l'emplacement d'installation pour le ventilateur 2006, ce qui peut aider le module émetteur à fonctionner de manière stable dans des conditions de puissance élevée.
Module ES900TX : Le module ES900TX est un dispositif de transmission 915 MHz développé sur la base d'ExpressLRS. Il présente une très longue portée, un fonctionnement stable et une faible latence.
Mise à jour du micrologiciel : en raison de l'amélioration continue et des mises à jour du micrologiciel ExpressLRS, nous vous recommandons fortement d'utiliser le configurateur ExpressLRS pour mettre à jour le micrologiciel afin d'obtenir la meilleure expérience.
44,85 € SUR AMAZON
RotorLogic
RadioMaster EdgeTX Télécommande Portable de Poche avec éclairage LED intégré Mode 2 (Anthracite, ELRS)
71
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#9
▼ Montrer plus
▲ Montrer moins
Le RadioMaster Pocket est un excellent choix pour les pilotes qui recherchent une petite radio légère avec toutes les fonctionnalités puissantes auxquelles vous vous attendez.
Disponible en versions ExpressLRS et MPM CC2500/préinstallé avec le firmware EdgeTX
Dispose de cardans à effet Hall en standard pour un galop fluide et une réponse précise
Les lumières LED intégrées aident à visualiser vos entrées d'interrupteur/écran LCD rétroéclairé offrant un équilibre parfait entre taille et fonctionnalité
Dans la boîte : radio de poche, pochette de transport personnalisée, câble USB-C, accessoires, manuel d'utilisation (français non garanti)
150,00 € SUR AMAZON
JUYAXIN
JUYAXIN HR8E ELRS Récepteur 2,4 GHz à aile fixe Adaptateur de réception 9CH ELRS 3.3.0 préinstallé
66
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#10
▼ Montrer plus
▲ Montrer moins
Double antenne haute sensibilité de 1800 mm, réception stable.
Broche de 2,54 mm, faible résistance, bonne conductivité.
Retour de tension et détection automatique de commutation.
Petite taille.
S'adapte à différents modèles de modèles de drone à aile fixe.
38,06 € SUR AMAZON
elrs receiver
récepteur elrs
zorro elrs
elrs rx
rx elrs