Elrs 2.4 Betafpv
Les 10 meilleurs produits en juin 2025
Dernière mise à jour :
11 juin 2025
BETAFPV
BETAFPV ELRS 2.4GHz Micro Receiver Support 5 CH PWM Outputs Failsafe Function with IPEX MHF T Antenna Compatible for Multirotors Fixed-Wing Helicopters RC Cars Boats Easy to Install Plug and Play
Livraison gratuite
99
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT
▼ Montrer plus
▲ Montrer moins
【PWM Output】BETAFPV ELRS Micro receiver is the first ELRS receiver with PWM output on BETAFPV. Supports 5 channels PWM outputs. It also supports flash CRSF output firmware, in this case CH2 corresponds to TX and CH3 corresponds to RX
【Application】ELRS micro receiver adapts for multiple types of models like fixed-wing, helicopters, RC cars, boats and etc.
【Failsafe Function】When the connection or signal is lost between the radio transmitter and receiver, the failsafe function will adjust all the channels to the failsafe values set by the users, maximum keep safety and prevent from flying away. It's necessary to set up failsafe values properly if you are not using a flight controller, such as RC fixed-wing
【Weight&Size】Weighing about 4.5g with an antenna and with the sizes of 19mm*32mm*9mm (without antenna). It means that an FPV drone can not afford to carry.
【Plug &Play】With the plug-and-play connect ports, micro receiver is very easy to use and does not need to solder
16,99 € SUR AMAZON
BETAFPV
BETAFPV SuperD ELRS Diversity Receiver with Dual Receiver Chains 2 Antennas TXCO Tech Support CRSF Protocol for FPV Drone Fixed-Wing Aircraft Long Range Flying Aerial Photography FPV Freestyle Tricks
Livraison gratuite
97
QUALITÉ SUPÉRIEURE
VOIR SUR AMAZON
Amazon.fr
#2
▼ Montrer plus
▲ Montrer moins
【TXCO Tech】SuperD ELRS 2.4G Diversity Receiver is built-in a TCXO (temperature compensated crystal oscillator), which is shared by two RF chips for a super accurate clock source. The true diversity receiver including two RF chips and PA+LNA will generate a large amount of heat when working. With the high-quality TCXO, it can withstand extreme temperatures with no fear of heat and cold, continuously outputting accurate frequency for long range flight.
【Dual RF Receiver Chains】SuperD ELRS 2.4G Diversity Receiver with two complete RF receiver chains (referring to PA+LNA+SX1280), ensuring longer and more stable flying for FPV drones and RC airplanes. Based on the latest official ExprssLRS. It comes with ExpressLRS V3.0.0 firmware.
【Two Dipole T Antennas】SuperD ELRS 2.4G Diversity Receiver comes with Two Dipole T antennas, it will create an omnidirectional signal for good signal transmission. Placing the antenna separately and vertically as far part as possible to get a better signal is recommended.
【Compatible Products】Not only it is used for FPV drones but also for FPV fixed-wing, or other FPV aircraft. It has superb performance in long range flying. It greatly fulfills the requirements of reliability for long range flying, aerial photography, or FPV freestyle tricks
【Ultralight Weight】 Ultralight weight only 1.1g without the antenna. The receiver board features a reasonable layout and is impeccably clean. Very easy to solder.
28,99 € SUR AMAZON
BETAFPV
BETAFPV ExpressLRS 2.4G OpenTX Mini Nano Récepteur Performances à Longue portée à taux de rafraîchissement élevé pour Drone de Course FPV
Livraison gratuite
96
QUALITÉ SUPÉRIEURE
VOIR SUR AMAZON
Amazon.fr
#3
▼ Montrer plus
▲ Montrer moins
【ExpressLRS】 ExpressLRS est un lien RC open source pour les applications RC, basé sur le matériel Semtech Lora SX127x ou SX1280 pour RX et TX respectivement. Cela fait d'ExpressLRS l'une des liaisons RC les plus rapides disponibles tout en offrant des performances à longue portée.
【ExpressLRS Receiver】 Le récepteur Nano BETAFPV est basé sur le projet ExpressLRS, un lien RC open source pour les applications RC qui vise à obtenir les meilleures performances de lien possibles en termes de vitesse, de latence et de portée pour le module ELRS TX ou la baie Nano, etc.
【Protocole série Crossfire】 ExpressLRS utilise le protocole série Crossfire (protocole AKA CRSF) pour communiquer entre le récepteur et la carte contrôleur de vol. Assurez-vous donc que votre carte contrôleur de vol prend en charge le protocole série CRSF. La configuration du protocole CRSF peut être consultée à la quatrième page du manuel.
【Taille Nano】Ce récepteur ne pèse que 0,7 gramme et le volume est de 12 mm * 19 mm, ce qui est très approprié pour Tiny whoop en raison de sa taille ultra légère et Nano.
【Configuration & Bind】 Le récepteur Nano peut entrer dans l'état de liaison par mise sous/hors tension trois fois. La méthode de liaison spécifique est accessible. Envoyez-nous simplement un e-mail pour les pages d'assistance.
22,99 € SUR AMAZON
BETAFPV
BETAFPV ExpressLRS 2.4G Lite Receiver with Flat SMD Ceramic Antenna High Refresh Rate Long Range Performance Compatible for 65/75/85mm FPV Racing Whoop Drone
Livraison gratuite
90
QUALITÉ DISTINGUÉE
VOIR SUR AMAZON
Amazon.fr
#4
▼ Montrer plus
▲ Montrer moins
【Performance】Ultralight ELRS Lite receiver has a 2.4GHz Flat SMD ceramic antenna. A solid flat antenna without irregular parts can withstand crashes, making the receiver not so fragile. Perform well in control, range and stability, bringing a good flight experience to pilots
【Weight&Size】New lite receiver with a flat antenna features a 3mm extra-thin board and 0.53g lightweight, which requires less assembly space on drones with limited space
【ExpressLRS】 ExpressLRS is an open-source RC link for RC applications, based on Semtech Lora SX127x or SX1280 hardware for RX and TX respectively. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance
【ExpressLRS Lite Receiver】BETAFPV ELRS Lite receiver is based on the ExpressLRS project, an open-source RC link for RC applications that aims to achieve the best possible link performance in both speeds, latency, and range suit for ELRS TX module, etc
【Configuration & Bind】The Lite receiver comes with officially major release V1.1.0 protocol and no Binding Phrase included. Lite receiver could enter binding status by power on/off three times
16,99 € SUR AMAZON
BETAFPV
BETAFPV Frsky LiteRadio 3 Remote Control Radio Transmitter with Nano Bay for External TX Module, Support FPV Simulator Configurator V2 Firmware Update Joystick Calibration for FPV Quad-Mode 2
29% Réduction
Livraison gratuite
82
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#5
▼ Montrer plus
▲ Montrer moins
BETAFPV Configurator Supported: The BETAFPV Configurator V2 is an open-source configuration tool tailored for BETAFPV drones and remote controls that support macOS Linux (Debian family) platforms. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Please DO NOT power on the transmitter before connecting it to the PC. Doing so will render the USB port non-functional
Firmware Update Supported: BETAFPV has released the new firmware for the LiteRadio series remote controller, which brings new features and improvements. Pilots can flash the latest firmware to enjoy the new functions. Please confirm the firmware version first, and refer to the user manual in the package to upgrade the latest firmware if your transmitter has the older firmware version
Simulator&Platform Supported: Experience the ultimate flexibility with LiteRadio 3, your gateway to popular FPV simulators like VelociDrone, Liftoff, TRYP, DRL, DCL, DJI, etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 3 ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight Simulator on the Windows system and elevate your virtual flying experience to new heights (Pilots need to Update the Latest Firmware to enjoy the above features)
Frsky Protocol: The default protocol of this LiteRadio 3 Radio Transmitter is Frsky FCC D16, it also support 4 different internal protocols which are Frsky D8, Futaba S-FHSS, Frsky FCC D16 and Frsky LBT D16. Pilots can change the protocol easily via radio transmitter. For how to change it, please refer to the user manual. Note: LiteRadio 3 Frsky version only works with D16 ACCST 1.X Frsky protocol. So if you use a Frsky receiver with D16 ACCST 2.X version or ACCESS version, the binding will fail
Built-in Battery&Charging Module: Equipped with a built-in 2000mAh 1S battery and built-in charging module, you can charge by USB and it can work up to 15 hours without an external module. Meanwhile, it designed a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously
External TX Module: LiteRadio 3 features a new design with a nano bay, it supports the external TX module(ELRS/CRSF/TBS protocol only), please note that the external module should support the CRSF protocol when using other brands, if you are ready to install the TBS external nano module, the case size of the nano module should be 64*42*25mm
54,99 € SUR AMAZON
BETAFPV
BETAFPV ELRS V3 LiteRadio 2 SE Télécommande Radio, Soutien Configurateur V2, Mise à Jour du Micrologiciel, Simulateur FPV, Chargement USB-C, Calibrage Joystick, pour Drone FPV RC Quad -Mode 2
25% Réduction
Livraison gratuite
82
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#6
▼ Montrer plus
▲ Montrer moins
BETAFPV Configurator V2 Supported: It is an open-source configurator tool tailored for BETAFPV drones and remote controls. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Officially released in Dec 2024, supports Windows/macOS/Linux (Debian family) platforms
Firmware Update Supported: BETAFPV has released the new firmware for LiteRadio series remote controller. Pilots can flash LiteRadio 2 SE radio transmitter with firmware version V2024.11.8 or later, a significant upgrade will be unlocked. For How to Update, please refer to user manual
FPV SIM&Platform Support: It has the function of FPV simulator, which can act as a USB Joystick, suitable for FPV starters to play FPV SIM like VelociDrone, Liftoff, TRYP, DRL, DJI etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 2 SE ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight SIM on Win system and elevate your virtual flying experience to new heights(Need to Update the Latest Firmware First)
ELRS Firmware Version: LiteRadio 2 SE Transmitter's firmware is ELRS V3, it can't be bound with your equipment with ELRS 2.X version. Please make sure the receiver or the TX module has same ELRS firmware version and then could be bound together. If you don't know the ELRS firmware version, please email us via Amazon
Built-in Battery&Charging Module: LiteRadio 2 SE radio transmitter remote controller has a built-in 1000mAh 1S battery, which can use up to 8 hours. Comes with a built-in charging module, supports USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. While it needs to be re-charged (when the voltage is lower than 3.5V), the LED will turn red first, then it will turn blue and flash slowly
44,99 € SUR AMAZON
BETAFPV
BETAFPV ELRS V3 LiteRadio 3 RC Radio Transmitter with Nano Bay for External TX Module, Support FPV Simulator BETAFPV Configurator V2 Firmware Update Joystick Calibration for FPV Drone Quad - Mode 2
Livraison gratuite
79
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#7
▼ Montrer plus
▲ Montrer moins
BETAFPV Configurator Supported: The BETAFPV Configurator V2 is an open-source configuration tool tailored for BETAFPV drones and remote controls that support macOS Linux (Debian family) platforms. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Please DO NOT power on the transmitter before connecting it to the PC. Doing so will render the USB port non-functional
Firmware Update Supported: BETAFPV has released the new firmware for the LiteRadio series remote controller, which brings new features and improvements. Pilots can flash the latest firmware to enjoy the new functions. Please confirm the firmware version first, and refer to the user manual in the package to upgrade the latest firmware if your transmitter has the older firmware version
System&Platform Supported: Experience the ultimate flexibility with LiteRadio 3, your gateway to popular FPV simulators like VelociDrone, Liftoff, TRYP, DRL, DCL, DJI, etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 3 ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight Simulator on the Windows system and elevate your virtual flying experience to new heights
Built-in Battery&Charging Module: Equipped with a built-in 2000mAh 1S battery and built-in charging module, you can charge by USB and it can work up to 15 hours without an external module. Meanwhile, it designed a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously
External TX Module: LiteRadio 3 features a new design with a nano bay, it supports the external TX module(ELRS/CRSF/TBS protocol only), please note that the external module should support the CRSF protocol when using other brands, if you are ready to install the TBS external nano module, the case size of the nano module should be 64*42*25mm
Newly Designed: LiteRadio 3 radio transmitter comes with ergonomic stick ends, the stick is detachable, anti-slip, and adjustable in height, it has long longevity of up to 120k times rotations. The potentiometer is positioning accuracy and fast response sensitivity, bringing a good experience to your flight
76,99 € SUR AMAZON
SPEEDY BEE
SpeedyBee ELRS Récepteur FPV - 2.4ghz ExpressLRS Nano Receiver Drone Module RX avec Antenne T UFL 78mm pour Drone FPV Tiny Whoop Fixed-Aile Fixe RC Plane
Livraison gratuite
77
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#8
▼ Montrer plus
▲ Montrer moins
Pour les courses FPV ou les longues distances. Convient pour les Whoops, les drones et les modèles à voilure fixe.
Conception optimisée du PCB pour une meilleure dissipation de la chaleur.
Antenne Diversity pour améliorer la stabilité et la portée du signal.
32,99 € SUR AMAZON
SPARKHOBBY
SPARKHOBBY Beta FPV elrs expresslrs Nano télécommande TX v2 Module 2,4ghz 915mhz 1000mw avec antenne t-LED pour Drones quadricoptères de Course rc (Nano V2 2,4GHz)
72
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#9
▼ Montrer plus
▲ Montrer moins
L'antenne en T incluse est conçue pour une couverture maximale du signal. L'antenne T-LED est disponible pour les applications directionnelles.
Doté d'une sortie allant jusqu'à 1 W, de taux de rafraîchissement F-1000 Hz et d'un système de refroidissement à haute efficacité, le module ELRS représente la pointe de la technologie
57,40 € SUR AMAZON
Hsthe Sea
Hsthe Sea RP3 ExpressLRS 2,4 GHz ELRS Nano Récepteur Récepteur Longue Portée à Faible Latence avec Antenne UFL T pour FPV Micro Drone FPV Racing Drone Quadcopter
Livraison gratuite
70
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#10
▼ Montrer plus
▲ Montrer moins
Développée autour du microcontrôleur ESP8285 et de la puce RF SX1280IMLTRT, la série RP offre des liaisons RF Lora et FLRC 2,4 GHz offrant une portée incroyable et une faible latence.
Avec le Wi-Fi intégré, les mises à jour FW peuvent être effectuées sur votre bateau sans qu'il soit nécessaire de retirer le récepteur.
La liaison peut être effectuée à l'aide d'une phrase de liaison, ce qui signifie qu'il n'y a plus de prises de liaison ou d'appuis fastidieux sur les boutons lorsque vous essayez de brancher votre batterie.
PA fournissant jusqu'à 250 mw de performances de télémétrie et de commutation d'antenne pour la diversité d'antenne.
L'emballage comprend : 1 x récepteur nano RP3 ExpressLRS 2,4 GHz, 2 x antennes UFL 2,4 GHz T, 1 x manuel d'utilisation.
33,99 € SUR AMAZON
elrs 2.4
betafpv elrs
#1 GAGNANT
