main logo

Freenove

Les 10 meilleurs produits en juillet 2025
Dernière mise à jour : 16 juillet 2025
Freenove
Freenove
Freenove Computer Case Kit for Raspberry Pi 5 (Not Included), 128GB M.2 NVMe SSD 800 MB/s, 4.3 inch Touchscreen, 5 MP Camera, OLED Screen, Stereo Speakers, 3.5 mm and Optical Audio (S/PDIF)
Livraison gratuite
star

99

QUALITÉ MAXIMALE

VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT

  • Computer Case Kit: Integrated with M.2 NVMe PCIe SSD slot, 4.3 inch touchscreen (800 x 480 pixel, color IPS wide viewing angle, 5-point capacitive touch), 5 MP camera (2592 x 1944 pixels), 0.96 inch OLED screen (128 x 64 pixel, single-color), audio system, cooling system, programmable RGB lights, exposed interface and GPIO (Note: Compatible with Raspberry Pi 5 only, NOT included)
  • M.2 SSD Slot (128 GB SSD included): Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5) (The write speed of SSD is much faster than that of memory card)
  • Boot from SSD: SSD can be used as a system disk instead of just an regular disk, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
  • Audio System: Built-in stereo speakers with on / off switch, plus 3.5 mm and optical (S/PDIF) audio outputs
  • Cooling System: An active cooler for Raspberry Pi, 2 fans for the case (Automatically start and stop based on temperature)
  • 99,95 € SUR AMAZON
Freenove
Freenove
Freenove Breakout Board for ESP32 / ESP32-S3 WROVER WROOM, Terminal Block Shield HAT with Pin Header, 5V 3.3V Power Outputs, GPIO Status LED
Livraison gratuite
star

97

QUALITÉ SUPÉRIEURE

VOIR SUR AMAZON
Amazon.fr
#2

  • Compatible Models: Freenove ESP32 / ESP32-S3 series (Note: Not compatible with boards from other brands due to different pinout)
  • GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
  • Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
  • Power Circuit: Provide multiple 5V and 3.3V power outputs (5V output up to 3A with external power supply)
  • Terminal Block and Header: Connect to all pins of ESP32 / ESP32-S3, 2.54 mm (0.1 inch) pitch
  • 12,95 € SUR AMAZON
Freenove
Freenove
Freenove RFID Starter Kit v2.0 avec Carte V4 (Compatible avec Arduino IDE), 267 Pages de Tutoriels Détaillés, 198 Articles, 49 Articles
Livraison gratuite
star

95

QUALITÉ EXCELLENTE

VOIR SUR AMAZON
Amazon.fr
#3

  • 267-page detailed tutorial (including basic electronics and programming knowledge) -> The download link can be found on the product box. (No paper tutorial.)
  • 198 common items -> All parts needed to complete the projects in the tutorial. No soldering required.
  • 49 interesting projects -> Each project has circuit diagrams and verified code with detailed explanations.
  • Extra advanced projects -> Make virtual instruments (voltmeter, oscilloscope) and game consoles.
  • Get support -> Our technical support team is always ready to answer your questions.
  • 41,95 € SUR AMAZON
Freenove
Freenove
Freenove Kit de Démarrage Complet pour Raspberry Pi 5 4 B 3 B+ 500 Zero 2 W, Tutorial de 1170 Pages, Python C Java Scratch Processing Code, 386 Articles, 164 Projets, Caméra Haut - parleurs
Livraison gratuite
star

89

QUALITÉ DISTINGUÉE

VOIR SUR AMAZON
Amazon.fr
#4

  • 386 articles au total: Ce kit complet comprend la plupart des composants, modules, capteurs et autres articles compatibles avec le Raspberry Pi (Raspberry Pi NON inclus)
  • 5 Ensembles de Code : 51 exemples Python (compatibles avec 2&3), 46 exemples C, 27 exemples Java, 25 exemples de traitement et 15 exemples Scratch (les exemples de traitement et Scratch fournissent des interfaces graphiques)
  • Tutorial détaillé: Peut être téléchargé (en Anglais, 1170 pages au total) ou consulté en ligne (original en Anglais, peut être traduit dans d'autres langues par les navigateurs) (Le lien du tutoriel se trouve sur la boîte du produit) (Pas de tutoriel papier)
  • 164 Projets du simple au complexe: fournit un guide étape par étape avec des connaissances en électronique et en composants, chaque projet a des schémas, des schémas de câblage, du code complet et des explications détaillées
  • Modèles compatibles: Raspberry Pi 5 / 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (5 non compatible avec haut-parleur, série 400 / Zero non compatible avec caméra et haut-parleur)
  • 64,95 € SUR AMAZON
Freenove
Freenove
Freenove 7 inch Touchscreen Monitor for Raspberry Pi 5 4 B 3 B+ A+, 800x480 Pixel IPS Display, 5-Point Touch Capacitive Screen, Driver-Free MIPI DSI Port
Livraison gratuite
star

87

QUALITÉ FIABLE

VOIR SUR AMAZON
Amazon.fr
#5

  • Specifically for Raspberry Pi: Only need the connection to the display port (marked CAM/DISP on Raspberry Pi 5, DISPLAY on 4 and previous)
  • Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ (No HDMI, not compatible with any other device)
  • Compatible Systems: Raspberry Pi OS (multi-touch available) / Ubuntu (single touch only)
  • Screen Parameters: 7 inch, 800x480 pixel, IPS type wide viewing angle, 5-point touch capacitive screen
  • Easy to Use: No configuration is required (for new and configuration-unchanged systems)
  • 53,95 € SUR AMAZON
Freenove
Freenove
Freenove ESP32-S3-WROOM Board Lite (2 Pack), Dual-Core 32-bit 240 MHz Microcontroller, Onboard Wireless, Python C Code, Example Projects Tutorial
Livraison gratuite
star

81

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#6

  • ESP32-S3-WROOM: Dual-core 32-bit microprocessor up to 240 MHz, 8 MB Flash, 8 MB PSRAM, onboard 2.4 GHz Wi-Fi and Bluetooth 5 (LE)
  • Detailed Tutorial: Provides step-by-step guide and several typical projects (The download link can be found on the product box) (No paper tutorial)
  • 2 Sets of Codes: MicroPython and C, two popular programming languages
  • Easy to Use: Just connect the board to your computer (installed IDE and driver) with the USB cable to program it
  • Get Support: Our technical support team is always ready to answer your questions
  • 22,95 € SUR AMAZON
Freenove
Freenove
Freenove Ultimate Starter Kit for ESP32-WROVER CAM (Included), Dual-Core 32-bit 240 MHz Microcontroller, Onboard Camera Wireless, Python C Java, 795-Page Detailed Tutorial, 240 Items, 122 Projects
Livraison gratuite
star

80

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#7

  • ESP32-WROVER: Dual-core 32-bit microprocessor up to 240 MHz, 4 MB Flash, 8 MB PSRAM, onboard 2.4 GHz Wi-Fi and Bluetooth 4.2 (LE), camera
  • 3 Sets of Codes: MicroPython, C and Processing (Java), Processing codes run on computers to provide graphical interfaces
  • 795-Page Detailed Tutorial in Total: Provides step-by-step guide with basic electronics and components knowledge (The download link can be found on the product box) (No paper tutorial)
  • 240 Items for 122 Projects: Each project has schematics, wiring diagrams, complete code and detailed explanations
  • 1GB Memory Card: Can be inserted into the ESP32 board to read and write files (Included in this kit)
  • 57,95 € SUR AMAZON
Freenove
Freenove
Freenove Ultimate Starter Kit for Raspberry Pi 5 4 B 3 B+ 400 Zero 2 W, 962-Page Detailed Tutorial, Python C Java Scratch Processing Code, 223 Items, 128 Projects (Raspberry Pi Not Included)
Livraison gratuite
star

76

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#8

  • 5 Sets of Codes: Python (compatible with 2&3), C, Java, Scratch and Processing (Scratch and Processing codes provide graphical interfaces)
  • 962-Page Detailed Tutorial in Total: Provides step-by-step guide with basic electronics and components knowledge (The download link can be found on the product box) (No paper tutorial)
  • 128 Projects from Simple to Complex: Each project has schematics, wiring diagrams, complete code and detailed explanations
  • 223 Items in Total: Includes commonly used electronic components, modules, sensors, wires and other compatible items
  • Compatible Models: Raspberry Pi 5 / 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (NOT included in this kit)
  • 49,95 € SUR AMAZON
Freenove
Freenove
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (Without SSD), M.2 Hat Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0/3.0, Max Speed 1231 MB/s
Livraison gratuite
star

72

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#9

  • Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max, PCIe 3.0: 1231 MB/s max) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
  • Compatible SSDs: M.2 NVMe SSDs, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs)
  • Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
  • Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
  • Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
  • 9,95 € SUR AMAZON
Freenove
Freenove
Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W/Zero W/Zero, Terminal Block Shield Hat with Pin Header, GPIO Status LED
Livraison gratuite
star

69

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#10

  • Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
  • GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
  • Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
  • Terminal Block and Header: Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54 mm (0.1 inch) pitch
  • Pin Name: The BCM numbering name of each pin is printed next to it
  • 11,95 € SUR AMAZON
freenove robot robot freenove