Radio Betafpv
Les 10 meilleurs produits en juillet 2025
Dernière mise à jour :
15 juillet 2025
BETAFPV
BETAFPV ELRS V3 LiteRadio 3 RC Radio Transmitter with Nano Bay for External TX Module, Support FPV Simulator BETAFPV Configurator V2 Firmware Update Joystick Calibration for FPV Drone Quad - Mode 2
29% Réduction
Livraison gratuite
99
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT
▼ Montrer plus
▲ Montrer moins
BETAFPV Configurator Supported: The BETAFPV Configurator V2 is an open-source configuration tool tailored for BETAFPV drones and remote controls that support macOS Linux (Debian family) platforms. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Please DO NOT power on the transmitter before connecting it to the PC. Doing so will render the USB port non-functional
Firmware Update Supported: BETAFPV has released the new firmware for the LiteRadio series remote controller, which brings new features and improvements. Pilots can flash the latest firmware to enjoy the new functions. Please confirm the firmware version first, and refer to the user manual in the package to upgrade the latest firmware if your transmitter has the older firmware version
System&Platform Supported: Experience the ultimate flexibility with LiteRadio 3, your gateway to popular FPV simulators like VelociDrone, Liftoff, TRYP, DRL, DCL, DJI, etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 3 ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight Simulator on the Windows system and elevate your virtual flying experience to new heights
Built-in Battery&Charging Module: Equipped with a built-in 2000mAh 1S battery and built-in charging module, you can charge by USB and it can work up to 15 hours without an external module. Meanwhile, it designed a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously
External TX Module: LiteRadio 3 features a new design with a nano bay, it supports the external TX module(ELRS/CRSF/TBS protocol only), please note that the external module should support the CRSF protocol when using other brands, if you are ready to install the TBS external nano module, the case size of the nano module should be 64*42*25mm
Newly Designed: LiteRadio 3 radio transmitter comes with ergonomic stick ends, the stick is detachable, anti-slip, and adjustable in height, it has long longevity of up to 120k times rotations. The potentiometer is positioning accuracy and fast response sensitivity, bringing a good experience to your flight
54,99 € SUR AMAZON
BETAFPV
BETAFPV Frsky LiteRadio 3 Remote Control Radio Transmitter with Nano Bay for External TX Module, Support FPV Simulator Configurator V2 Firmware Update Joystick Calibration for FPV Quad-Mode 2
29% Réduction
Livraison gratuite
96
QUALITÉ SUPÉRIEURE
VOIR SUR AMAZON
Amazon.fr
#2
▼ Montrer plus
▲ Montrer moins
BETAFPV Configurator Supported: The BETAFPV Configurator V2 is an open-source configuration tool tailored for BETAFPV drones and remote controls that support macOS Linux (Debian family) platforms. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Please DO NOT power on the transmitter before connecting it to the PC. Doing so will render the USB port non-functional
Firmware Update Supported: BETAFPV has released the new firmware for the LiteRadio series remote controller, which brings new features and improvements. Pilots can flash the latest firmware to enjoy the new functions. Please confirm the firmware version first, and refer to the user manual in the package to upgrade the latest firmware if your transmitter has the older firmware version
Simulator&Platform Supported: Experience the ultimate flexibility with LiteRadio 3, your gateway to popular FPV simulators like VelociDrone, Liftoff, TRYP, DRL, DCL, DJI, etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 3 ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight Simulator on the Windows system and elevate your virtual flying experience to new heights (Pilots need to Update the Latest Firmware to enjoy the above features)
Frsky Protocol: The default protocol of this LiteRadio 3 Radio Transmitter is Frsky FCC D16, it also support 4 different internal protocols which are Frsky D8, Futaba S-FHSS, Frsky FCC D16 and Frsky LBT D16. Pilots can change the protocol easily via radio transmitter. For how to change it, please refer to the user manual. Note: LiteRadio 3 Frsky version only works with D16 ACCST 1.X Frsky protocol. So if you use a Frsky receiver with D16 ACCST 2.X version or ACCESS version, the binding will fail
Built-in Battery&Charging Module: Equipped with a built-in 2000mAh 1S battery and built-in charging module, you can charge by USB and it can work up to 15 hours without an external module. Meanwhile, it designed a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously
External TX Module: LiteRadio 3 features a new design with a nano bay, it supports the external TX module(ELRS/CRSF/TBS protocol only), please note that the external module should support the CRSF protocol when using other brands, if you are ready to install the TBS external nano module, the case size of the nano module should be 64*42*25mm
54,99 € SUR AMAZON
BETAFPV
BETAFPV ELRS V3 LiteRadio 2 SE Télécommande Radio, Soutien Configurateur V2, Mise à Jour du Micrologiciel, Simulateur FPV, Chargement USB-C, Calibrage Joystick, pour Drone FPV RC Quad -Mode 2
25% Réduction
Livraison gratuite
92
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#3
▼ Montrer plus
▲ Montrer moins
BETAFPV Configurator V2 Supported: It is an open-source configurator tool tailored for BETAFPV drones and remote controls. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Officially released in Dec 2024, supports Windows/macOS/Linux (Debian family) platforms
Firmware Update Supported: BETAFPV has released the new firmware for LiteRadio series remote controller. Pilots can flash LiteRadio 2 SE radio transmitter with firmware version V2024.11.8 or later, a significant upgrade will be unlocked. For How to Update, please refer to user manual
FPV SIM&Platform Support: It has the function of FPV simulator, which can act as a USB Joystick, suitable for FPV starters to play FPV SIM like VelociDrone, Liftoff, TRYP, DRL, DJI etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 2 SE ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight SIM on Win system and elevate your virtual flying experience to new heights(Need to Update the Latest Firmware First)
ELRS Firmware Version: LiteRadio 2 SE Transmitter's firmware is ELRS V3, it can't be bound with your equipment with ELRS 2.X version. Please make sure the receiver or the TX module has same ELRS firmware version and then could be bound together. If you don't know the ELRS firmware version, please email us via Amazon
Built-in Battery&Charging Module: LiteRadio 2 SE radio transmitter remote controller has a built-in 1000mAh 1S battery, which can use up to 8 hours. Comes with a built-in charging module, supports USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. While it needs to be re-charged (when the voltage is lower than 3.5V), the LED will turn red first, then it will turn blue and flash slowly
44,99 € SUR AMAZON
BETAFPV
BETAFPV Frsky LiteRadio 2 SE Télécommande Radio, Soutenu BETAFPV Configurateur V2, Mise à Jour du Micrologiciel, Simulateur FPV, Chargement USB-C, Calibrage Joystick, pour FPV RC Drone Quad -Mode 2
21% Réduction
Livraison gratuite
90
QUALITÉ DISTINGUÉE
VOIR SUR AMAZON
Amazon.fr
#4
▼ Montrer plus
▲ Montrer moins
BETAFPV Configurator V2 Supported: It is an open-source configurator tool tailored for BETAFPV drones and remote controls. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Officially released in Dec 2024, supports Windows/macOS/Linux (Debian family) platforms
FPV SIM&Platform Support: It has the function of FPV simulator, which can act as a USB Joystick, suitable for FPV starters to play FPV SIM like VelociDrone, Liftoff, TRYP, DRL, DJI etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 2 SE ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight SIM on Win system and elevate your virtual flying experience to new heights
Frsky FCC D16 Protocol: LiteRadio 2 SE transmitter comes with Frsky FCC D16(ACCST1.X) by default. Pilots can easily change Futaba S-FHSS, Frsky D8, Frsky FCC D16, and Frsky LBT D16 mode via the radio transmitter. For how to flash, please refer to product pictures and user manual
Built-in Battery&Charging Module: LiteRadio 2 SE radio transmitter remote controller has a built-in 1000mAh 1S battery, which can use up to 8 hours. Comes with a built-in charging module, supports USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. While it needs to be re-charged (when the voltage is lower than 3.5V), the LED will turn red first, then it will turn blue and flash slowly
Note: D16 (FCC & LBT) protocol currently does not support the Frsky receivers with ACCST 2.0 firmware or higher, and it can only bind with ACCST 1.X firmware version XM+ receivers. System Upgrade: Updates with BETAFPV self-developed LiteRadio System. Player can directly operate the Joystick Calibration and Upgrade Firmware on the radio transmitter, which is more convenient for the beginner racer to operate
44,99 € SUR AMAZON
BETAFPV
BETAFPV ExpressLRS Lite Receiver with Flat SMD Ceramic Antenna High Refresh Rate Long Range Performance Compatible for 65/75/85mm FPV Racing Whoop Drone V1.2
Livraison gratuite
88
QUALITÉ DISTINGUÉE
VOIR SUR AMAZON
Amazon.fr
#5
▼ Montrer plus
▲ Montrer moins
Updated: Building on the open-source ExpressLRS framework – renowned for delivering ultra-low latency, blistering speeds, and exceptional range – the upgraded Lite Receiver flat antenna V1.2 now features an extra-thin 3mm board, an ultra-lightweight 0.46g design, and enlarged soldering pads. Optimised impedance matching elevates signal reliability and sensitivity, enabling 300m range at 25mW transmitter power and up to 1000m at 50mW, pushing the boundaries of long-range potential in micro-sized receivers
Enhanced Signal Reliability & Sensitivity: The flat antenna V1.2’s optimised impedance matching unlocks a transformative leap in signal reliability and sensitivity. Where the original flat antenna V1.1 achieved 500-600m at 50 transmitter power/500Hz, the V1.2 now delivers a robust 1000m under identical conditions, alongside superior signal consistency. This precision-tuned design minimises packet loss during high-speed manoeuvres and enhances low-power efficiency, ensuring crisp responsiveness at 25 (300m range) and unwavering stability at max output
Lightweight Design, Simplified Installation: In response to community feedback, the flat antenna V1.2 now features enlarged soldering pads designed to simplify installation and reduce errors – a critical upgrade for both novices and seasoned builders. Combined with a 13.2% weight reduction (now just 0.46g), the updated design retains its compact footprint while shedding unnecessary mass, freeing up crucial weight budgets for performance-focused builds
Flat Antenna: The Lite Receiver flat antenna V1.2 boasts a 3mm ultra-thin board and 0.46g lightweight design, perfect for space-limited drones. Its low-profile, crash-resistant build offers greater durability than traditional tower antennas. The V1.2’s optimised impedance matching enhances signal reliability and sensitivity, extending its range to 1,000m. This upgrade focuses on refining the flat antenna’s crash resistance, providing pilots with unmatched range and durability in a compact form
Note: Now the firmware version of Lite Receiver flat antenna V1.2 is ELRS 3.3.0; ELRS Innovative team has officially released version 3.3.0. If you want to flash official ELRS firmware, please download the latest ExpressLRS-Configurator or read our manual for flashing it. Significantly, the TX module and receiver have to be in the same ELRS version, otherwise, the frequency cannot match successfully
Configuration & Bind: ExpressLRS uses the Crossfire serial protocol (AKA CRSF protocol) to communicate between the receiver and the flight controller board. So make sure your flight controller board supports the CRSF serial protocol. For more binding details, please refer to manual or the product picture
16,99 € SUR AMAZON
BETAFPV
BETAFPV ExpressLRS 2.4G OpenTX Mini Nano Récepteur Performances à Longue portée à taux de rafraîchissement élevé pour Drone de Course FPV
Livraison gratuite
80
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#6
▼ Montrer plus
▲ Montrer moins
【ExpressLRS】 ExpressLRS est un lien RC open source pour les applications RC, basé sur le matériel Semtech Lora SX127x ou SX1280 pour RX et TX respectivement. Cela fait d'ExpressLRS l'une des liaisons RC les plus rapides disponibles tout en offrant des performances à longue portée.
【ExpressLRS Receiver】 Le récepteur Nano BETAFPV est basé sur le projet ExpressLRS, un lien RC open source pour les applications RC qui vise à obtenir les meilleures performances de lien possibles en termes de vitesse, de latence et de portée pour le module ELRS TX ou la baie Nano, etc.
【Protocole série Crossfire】 ExpressLRS utilise le protocole série Crossfire (protocole AKA CRSF) pour communiquer entre le récepteur et la carte contrôleur de vol. Assurez-vous donc que votre carte contrôleur de vol prend en charge le protocole série CRSF. La configuration du protocole CRSF peut être consultée à la quatrième page du manuel.
【Taille Nano】Ce récepteur ne pèse que 0,7 gramme et le volume est de 12 mm * 19 mm, ce qui est très approprié pour Tiny whoop en raison de sa taille ultra légère et Nano.
【Configuration & Bind】 Le récepteur Nano peut entrer dans l'état de liaison par mise sous/hors tension trois fois. La méthode de liaison spécifique est accessible. Envoyez-nous simplement un e-mail pour les pages d'assistance.
22,99 € SUR AMAZON
BETAFPV
BETAFPV Betaflight ELRS Cetus X FPV Kit with LiteRadio 3 Transmitter, C04 Camera, VR03 Goggles with DVR Recording Function, Supports 2S Power Advanced RTF Kit for Beginners to Fly Faster and Farther
Livraison gratuite
78
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#7
▼ Montrer plus
▲ Montrer moins
【Betaflgiht FC Version】This Cetus X FPV Kit comes with the Betaflight Flight Controller, as the advanced ExpressLRS 2S power whoop bundle, which is a completely primary choice to reach a higher stage. Comes with an enhanced propulsion system, VR03 goggles, LiteRadio 3 radio transmitter controller, longer radio and video transmission, pilots can unlock more accomplishments to the next level
【Camera Version】If the camera is broken and need to replace it, please kindly note before buying a replacement camera for the Cetus X Quadcopter, this Cetus X FPV Kit is the version with Betaflight Flight Controller, which only can install the C04 camera with the M04 VTX, and it can't works with the C04 camere with Cetus Cetus FC version, please select the correct one when you order the replacement camera
【Camera Signal】The camera will lost the image due to the loose cable and many times of hits, please plug and unplug the cable of the camera if the drone has the issue of lost signal and re-bind the drone with the controller again
【Firmware & Function】Cetus X FPV Kit comes with the popular firmware in the FPV community. Please make sure the other receivers bind with the controller and have the same firmware version so that they can work together. And this kit also features a function of Betaflight Configurator, which allows pilots to learn how to set up the drone from zero to the next level
【Calibration】Please re-calibrate the joystick after repeated use or the remote control radio transmitter is subjected to physical impact, or the drone occurs a phenome of the the drone fly to one side. If the drone has something wrong with the prop and motor, please follow the manual to re-calibrate the flight controller
【LiteRadio 3 Transmitter】BETAFPV LiteRadio 3 Transmitter features an ergonomically designed handle and has superb performance in its working time lasting up to 15 hours. It also supports BETAFPV Configurator, which is a utility designed to simply update, configure, and tune the radio controller
【VR03 Goggles】BETAFPV VR03 Goggles come with a DVR recording function. Pilots can enjoy the playback saved through the goggles or export the videos by Micro SD card (not included), supporting most Analog VTXs in the market. This exciting function allows pilots to catch the memorably breathtaking moment, greatly heightening the FPV flying experience
347,99 € SUR AMAZON
ZDANYA
ZDANYA Transmetteur Radio BETAFPV Literadio 3, Prend en Charge Le protocole ExpressLRS Frsky Shadow pour Drone RC de Course FPV débutant(ExpressLRS 2.4G)
75
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#8
▼ Montrer plus
▲ Montrer moins
LiteRadio 3 est mis à niveau avec le système LiteRadio personnalisé auto-développé par BETAFPV. Les pilotes peuvent directement utiliser le calibrage du joystick et la mise à jour du micrologiciel sur l'émetteur radio, ce qui est plus pratique à utiliser pour le pilote débutant.
Equipé d'une batterie 1S intégrée de 2000 mAh, LiteRadio 3 peut fonctionner jusqu'à 15 heures sans module externe, apportant d'excellentes performances d'endurance.
Livré avec un module de chargement intégré, LiteRadio 3 prend en charge le chargement USB, ce qui est plus pratique à utiliser. Pendant ce temps, il conçoit un avertissement de faible consommation pour indiquer une batterie faible. Il indique une batterie faible et doit être rechargée si la lumière bleue clignote lentement et que le buzzer émet un bip continu.
Nouvellement conçu avec une baie, il prend en charge le module TX externe. Je recommande vivement le module BETAFPV ELRS, qui est compatible avec l'émetteur radio LiteRadio 3 et rend disponible le protocole CRSF.
Adoptant le revêtement en caoutchouc, LiteRadio 3 est ergonomique et a la forme d'une manette de jeu. Il est confortable à tenir et la texture antidérapante sur les poignées permet une prise solide.
117,85 € SUR AMAZON
BETAFPV
BETAFPV ELRS 2.4GHz Micro Receiver Support 5 CH PWM Outputs Failsafe Function with IPEX MHF T Antenna Compatible for Multirotors Fixed-Wing Helicopters RC Cars Boats Easy to Install Plug and Play
Livraison gratuite
73
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#9
▼ Montrer plus
▲ Montrer moins
【PWM Output】BETAFPV ELRS Micro receiver is the first ELRS receiver with PWM output on BETAFPV. Supports 5 channels PWM outputs. It also supports flash CRSF output firmware, in this case CH2 corresponds to TX and CH3 corresponds to RX
【Application】ELRS micro receiver adapts for multiple types of models like fixed-wing, helicopters, RC cars, boats and etc.
【Failsafe Function】When the connection or signal is lost between the radio transmitter and receiver, the failsafe function will adjust all the channels to the failsafe values set by the users, maximum keep safety and prevent from flying away. It's necessary to set up failsafe values properly if you are not using a flight controller, such as RC fixed-wing
【Weight&Size】Weighing about 4.5g with an antenna and with the sizes of 19mm*32mm*9mm (without antenna). It means that an FPV drone can not afford to carry.
【Plug &Play】With the plug-and-play connect ports, micro receiver is very easy to use and does not need to solder
16,99 € SUR AMAZON
BETAFPV
BETAFPV Cetus Kit de Drone RTF Avec 3 Modes de vol Fonction de Maintien D'altitude Fonction D'atterrissage D'urgence Prêt à Voler Compatible pour Les Débutants FPV Garçons Filles Adolescents
Livraison gratuite
70
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#10
▼ Montrer plus
▲ Montrer moins
【Kit Cetus FPV】 Le kit BETAFPV Cetus FPV est préparé pour les démarreurs FPV. Il est livré avec une conception spéciale du quadcopter whoop brossé Cetus, LiteRadio 2 SE et des lunettes VR02 FPV. La fonction de vol auxiliaire convient aux novices, réduisant considérablement le seuil de fonctionnement, prêt à voler, barrière d'entrée zéro
【Fonction de maintien d'altitude】La fonction de maintien d'altitude permet au quadricoptère Cetus de passer automatiquement en survol. Le quadricoptère peut rester à une hauteur actuelle lorsque les mains des pilotes ne sont pas sur l'émetteur. Le baromètre/laser permet d'obtenir un positionnement précis et stable ce qui rend le quad en vol stationnaire à l'intérieur très stable. Le vol n'a jamais été aussi facile pour un débutant. La fonction de maintien d'altitude n'est disponible qu'en mode N
【Fonction d'auto-protection】 Le quadricoptère Cetus a une excellente fonction d'auto-protection. Ce qui peut faire un atterrissage d'urgence lorsqu'il perd le contrôle ou en batterie faible. Il se désarmera également automatiquement et tombera au sol une fois qu'il aura une forte collision avec l'objet. Plus besoin de vous soucier de la perte et du crash
【3 modes de vol】 Normal/Sport/Manuel sont disponibles, ce qui peut satisfaire les différents besoins des pilotes et s'adapter à divers environnements de vol. Pendant ce temps, ces 3 modes prennent tous en charge 3 vitesses différentes en SLOW/MID/FAST
【Manuel et emballage】 Le manuel d'utilisation est inclus, les pilotes maîtriseront plus facilement le drone FPV. Toutes les pièces sont stockées dans une mallette de transport spéciale personnalisée, qui offre une meilleure protection et est facile à transporter. Tout support technique nécessaire, n'hésitez pas à contacter
223,94 € SUR AMAZON
betafpv radio
betafpv lite radio 2
betafpv lite radio 3
betafpv lite radio 3 pro
#1 GAGNANT
