Raspberry Pi 3 Hat Ssd
Les 10 meilleurs produits en septembre 2025
Dernière mise à jour :
6 septembre 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield Top for Raspberry Pi 5
Livraison gratuite
98
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT
▼ Montrer plus
▲ Montrer moins
【Compatibility】Only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € SUR AMAZON
Freenove
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (with 128GB SSD), M.2 Hat Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
Livraison gratuite
97
QUALITÉ SUPÉRIEURE
VOIR SUR AMAZON
Amazon.fr
#2
▼ Montrer plus
▲ Montrer moins
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 128GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
26,95 € SUR AMAZON
Raspberry Pi
M.2 Hat+ pour Raspberry Pi 5
Livraison gratuite
94
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#3
▼ Montrer plus
▲ Montrer moins
Unterstützt einspurige PCIe 2.0-Schnittstelle (500 Mo/s Spitzenübertragungsrate)
Unterstützt Geräte, die den M.2-M-Key-Edge-Anschluss verwenden. Unterstützt Geräte mit dem Formfaktor 2230 oder 2242
Kann angeschlossene M.2-Geräte mit bis zu 3 A versorgen. LED Inklusive Power und Aktivitäts
Entspricht der Raspberry Pi Hat + Spezifikation
Lieferung mit Flachbandkabel, 16 mm Stapelkopf, Gewindeabstandshalter und Schrauben und gerändelter Doppelflanschschraube zur Sicherung und Unterstützung des M.2-Peripheriegeräts
16,14 € SUR AMAZON
Freenove
Freenove M.2 NVMe Adapter for Raspberry Pi 5 (with 256GB SSD), M.2 Hat Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
Livraison gratuite
92
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#4
▼ Montrer plus
▲ Montrer moins
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 256GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
36,95 € SUR AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Carte périphérique pour Raspberry Pi 5
Livraison gratuite
85
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#5
▼ Montrer plus
▲ Montrer moins
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
40,80 € SUR AMAZON
Geekworm
Geekworm Raspberry Pi 4 SATA X825 V2.0, 2.5 inch SATA HDD/SSD Expansion Board UASP Supported, Compatible with Raspberry Pi 4 (8GB/4GB/2GB)
Livraison gratuite
82
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#6
▼ Montrer plus
▲ Montrer moins
【Update】X825 V2.0 is the updated version from X825 V1.5. You can use X825 with your raspberry pi 4 and 2.5 inch SATA HDD / SSD
【How to Power】√ Model 1. power via X825 DC Jack: 5V ≥3A with DC 5521 Jack; √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Packing List】X825 V2.0 Board * 1, USB 3.1 Connector * 1, Mounting Screw Pack * 1
【Document】User Manual: wiki.geekworm.com/X825_V2.0; Installation video: youtu.be/JxUNhIxXgj4
【Matching Metal Case】X825 V2.0 only compatible with X825-C8 Case (ASIN: B09295FHBW), X825-C8 Case compatible with max. 9.5mm HDD/SSD. Also fit with X735 Cooling & Power Mgnt Board (ASIN: B07NLR49L1)
34,00 € SUR AMAZON
Raspberry Pi
Raspberry Pi 4 Modèle B (8 Go)
Livraison gratuite
78
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#7
▼ Montrer plus
▲ Montrer moins
Broadcom BCM2711, Quad Core Cortex-A72 (ARM v8) SoC 64 bits @ 1,5 GHz
1 Go, 2 Go, 4 Go ou 8 Go LPDDR4-3200 SDRAM (selon le modèle)
2,4 GHz et 5,0 GHz IEEE 802.11ac sans fil, Bluetooth 5.0, BLE Gigabit Ethernet
2 ports USB 3.0, 2 ports USB 2.0.
Raspberry Pi En-tête GPIO 40 broches standard (entièrement rétrocompatible avec les cartes précédentes)
83,00 € SUR AMAZON
Raspberry Pi
Bloc d'alimentation Officiel Raspberry Pi 5 USB-C 27 W, USB-C Power Supply, Blanc
Livraison gratuite
78
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#8
▼ Montrer plus
▲ Montrer moins
Entrée : 100-240 V CA
Sortie : 5,1 V, 5 A, 9 V, 3 A, 12 V, 2,25 A, 15 V, 1,8 A (Power Delivery)
Connecteur : USB-C
Câble : 1,2 m 18 AWG
Couleur : blanc
14,95 € SUR AMAZON
Coolwell
PCIe to 2-Channel SATA Hat+ Adapter for Raspberry Pi 5, SATA 3.0 Expansion Board with Dual SATA Ports, LED Indicators, EEPROM, Plug and Play, High-Speed HDD/SSD Storage Support
73
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#9
▼ Montrer plus
▲ Montrer moins
✅ High-Speed PCIe to 2-Port SATA 3.0 Adapter for Raspberry Pi 5: This dual-channel PCIe to SATA HAT+ supports SATA 3.0 (6Gbps) for fast and stable HDD/SSD storage, specially designed for Raspberry Pi 5 via 16PIN PCIe interface.
🔌 Plug and Play SATA Expansion Board, Driver-Free Setup: No driver installation needed—this SATA HAT+ adapter is fully plug-and-play on Rasp-berry Pi 5, allowing for quick setup of external storage with zero hassle.
💡 Onboard Dual LED Indicators for Status Monitoring: Features two status LEDs for each SATA port, making it easy to monitor SATA HDD/SSD activity and system operation at a glance.
📦 Integrated EEPROM for HAT ID and Product Info Storage: The onboard EEPROM stores the HAT+ identity and technical details, ensuring compatibility with the Rasp-berry Pi HAT+ standard and auto-recognition on boot.
🛠️ Compact, Reliable SATA Expansion for Raspberry Pi NAS Projects; Perfect for building your own Rasp-berry Pi NAS, media server, or data backup system—this 2-Port SATA PCIe adapter is compact, efficient, and ideal for DIY storage solutions.
25,91 € SUR AMAZON
GeeekPi
GeeekPi N04 M.2 M-Key NVMe SSD Shield for Raspberry Pi 5, M.2 2280 PCIe to NVMe SSD Shield Pip PCIe Peripheral Board Top for Raspberry Pi 5 4GB/8GB (SSD and Pi5 Board are Not Included)
Livraison gratuite
65
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#10
▼ Montrer plus
▲ Montrer moins
N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra custom CNC SSD mount screw, no soldering required.
PCIe x1 interface in both Gen2 & Gen3 standards. The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0.
Ventilation hole design provides excellent ventilation airflow for cooling; Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.
Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
【Matching Case (NOT included)】Metal Case for N04 & Raspberry Pi 5, refer to ASIN: B0CMZG29LG; Aluminum Case for N04 & Raspberry Pi 5,refer to ASIN: B0CMZCG8P7
19,99 € SUR AMAZON
raspberry pi 3 ssd
ssd raspberry pi 3
raspberry pi hat ssd
raspberry pi ssd hat
hat raspberry pi 3
raspberry pi 3 hat
boitier raspberry pi 3 ssd
raspberry pi 3 sata hat
raspberry pi 4 hat ssd
raspberry pi 4 ssd hat
#1 GAGNANT
