Raspberry Pi 4 Battery
Les 10 meilleurs produits en mai 2025
Dernière mise à jour :
23 mai 2025
PI PISUGAR
Pisugar S Plus Portable 5000 mAh UPS Lithium Battery Power Module Platform for Every Raspberry Pi 3B/3B+/4B Model Accessories handhold(Not Include Raspberry Pi)
Livraison gratuite
99
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT
▼ Montrer plus
▲ Montrer moins
UPS function: The external power supply is disconnected to continuously supply power and obtain the external power status. External power access can trigger boot, suitable for unattended projects.
Input and output: 5V3A output, 5V3A input
GPIO button: It can trigger the device to turn on when it is turned off, and it can be used as a custom button after turning on (when the automatic power-on function is turned off)
Bottom connection: convenient connection method, complete installation in one minute, without affecting GPIO expansion
Expansion: Expansion through wireless charging and solar charging
39,99 € SUR AMAZON
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-Compact 18650 UPS Shield with Auto Power on for Raspberry Pi 4 8GB/4GB/2GB Only
Livraison gratuite
98
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#2
▼ Montrer plus
▲ Montrer moins
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown.
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
29,89 € SUR AMAZON
miadore
miadore Wireless SNES Controller, with 2.4GHz USB Receiver & SNES Receiver, Compatible with Switch/Switch OLED/Windows PC/MAC OS/Raspberry Pi/SNES Console, 2 Pack Multi-color
Livraison gratuite
92
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#3
▼ Montrer plus
▲ Montrer moins
1. 2.4G wireless transmission technology ensures stable connection and zero delay, offers a range of up to 10 meters (32.8 feet), no more cords, allows you sit on the cozy sofa to enjoy the retro games.
2. USB SNES Controller: comes with USB receiver, compatible with Windows PC, Notebook Computer, Laptop Computer, Linux Raspberry Pi, iOS Mac, switch, switch online and steam deck.
3. Retro SNES controller: with SNES receiver, compatible with SNES/NES Console, just plug and play go.
4. High quality 8-way directional pad and sensitive buttons for precision control. In addition, this controller is equipped screenshot button, which enabling you to easily capture and save screenshots, even during gameplay.
5. Built-in 420mAh rechargeable lithium-ion battery, supporting about 8 hours playing times; comes with 1.5m/5ft charging cable, it is energy-saving and more environmentally friendly.
59,99 € SUR AMAZON
PI PISUGAR
Pisugar 3 Plus Portable 5000 mAh UPS Lithium Battery Power Module Platform for Every Raspberry Pi 3B/3B+/4B Model Accessories handhold(Not Include Raspberry Pi)
Livraison gratuite
92
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#4
▼ Montrer plus
▲ Montrer moins
PiSugar 3 plus adds a software watchdog function. When the function is turned on, the dog needs to be kicked regularly, which can effectively prevent the Raspberry Pi from crashing and improve the reliability of the system.
PiSugar 3 plus provides hardware battery protection like never before, limiting battery voltage to nearly 80%. When charging protection is turned on, the battery cycles life can be improved.Set up quadruple overvoltage protection function, overcurrent protection function and undervoltage protection function to ensure the safety of the Raspberry Pi, PiSugar as well as the lithium battery.
PiSugar 3 plus continues to use the pogo pin design to connect with Raspberry Pi from the back. In this way, it does not occupy the GPIO, and is compatible with other GPIO devices.
PiSugar 3 plus has full UPS functions and can set up multiple awakening methods to meet various unique project needs.
PiSugar 3 plus communicates with the Raspberry Pi through the I2C interface and is compatible with most I2C devices. In addition, the I2C communication address can be customized to avoid I2C address conflicts.
59,99 € SUR AMAZON
PI PISUGAR
Pisugar2 Pro Portable 5000 mAh UPS Lithium Battery Power Module Platform for Every Raspberry Pi 3B/3B+/4B Model Accessories (Not Include Raspberry Pi)
Livraison gratuite
87
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#5
▼ Montrer plus
▲ Montrer moins
Continuous Operation: PiSugar2 provides UPS function. It can also shut down safely when the power is too low to avoid data loss and damage caused by sudden power failure.
Elegant Experience: Control the module through well-designed graphical web interface. you can get power level and charging status, configure timing power on, custom button functions, low power auto off, etc.
Onboard RTC: The onboard RTC makes it possible to obtain real time in any network condition. Timing boot function is also provided.
Multiple Usage: Charge through TypeC port (compatible with e-mark) or microUSB port. PiSugar2 Pro adopts PH2.0 standard battery plug, you can also replace other lithium batteries with 3.7V output on your need.
Extensible Power: input/output pads are provided on the circuit board, which can be equipped with any 5V standard charging devices, such as solar panels and QI wireless charging.
60,00 € SUR AMAZON
Waveshare
Waveshare UPS Hat (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batteries (Not Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
Livraison gratuite
81
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#6
▼ Montrer plus
▲ Montrer moins
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying battery level on the system, easy to check the operating state of the HAT
Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
Onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time. Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life. Can provide with online development resources and manual
46,99 € SUR AMAZON
owootecc
Owootecc Retroflag GPi Case 2 + Dock for Raspberry Pi Compute Module 4 (CM4), with 3.0” LCD and 4000mAh Li-on Rechargeable Battery, Type C Charging Port and Pi Easy Install
80
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#7
▼ Montrer plus
▲ Montrer moins
Compatible avec Raspberry Pi CM4 Lite/eMMC
Boîtier Raspberry Pi inspiré de Game Boy, écran IPS 3" (640 x 480), port audio 3,5 mm, arrêt sûr, indicateur d'alimentation LED, bouton d'économie d'énergie
Batterie au lithium intégrée de 4000 mAh
Jouez à tout moment, n'importe où. Vous pouvez brancher votre GPi CASE 2 dans la station d'accueil pour le chargement.
Prend en charge la sortie HDMI vers la TV ou le projecteur pour les jeux sur grand écran. La station d'accueil GPi CASE 2 offre 2 ports USB pour les contrôleurs filaires USB, clar, souris, etc. Contenu : 1 ue GPi 2 + station d'accueil, 1 manuel d'instructions (français non ), 4 dissipateurs, 1 sac en flanelle
103,00 € SUR AMAZON
Waveshare
Waveshare UPS Hat, Stable 5V Power Output, Uninterruptible Power Supply for Raspberry Pi
Livraison gratuite
76
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#8
▼ Montrer plus
▲ Montrer moins
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5 V regulator, up to 2.5 A continuous output current. 5 V USB output, convenient for powering other boards
Batteries warning indicators, easy to check if the battery is connected correctly. Comes with development resources and manual (English language not guaranteed)
35,99 € SUR AMAZON
Waveshare
Waveshare UPS Hat Compatible with Raspberry Pi 5V Uninterruptible Power Supply Multi Battery Protection Circuits Charge and Power Output at The Same Time
Livraison gratuite
71
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#9
▼ Montrer plus
▲ Montrer moins
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Comes with development resources and manual.
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time. When the voltage dips too low, it is possible to save files properly and then shutdown the system by software, to avoid any data loss.
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable.
Onboard 5V regulator, up to 2.5A continuous output current 5V USB output, convenient for powering other boards. Batteries warning indicators, easy to check if the battery is connected correctly.
It is able to charge the batteries and provide power output at the same time from external power supply. Automatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble.
35,99 € SUR AMAZON
GeeekPi
GeeekPi Raspberry Pi UPS V5 Alimentation UPS Hat, Prise en Charge 18650 Chargeur de Batterie Power Bank Carte d'extension de Gestion de l'alimentation 5 V pour Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
Livraison gratuite
66
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#10
▼ Montrer plus
▲ Montrer moins
UPS Plus est une nouvelle génération de module de gestion de l'alimentation UPS qui prend en charge la mise à niveau du micrologiciel OTA et prend en charge le RTC intégré.
Il y a deux puces INA219 à bord pour détecter la tension des batteries et la tension de sortie d'UPS Plus vers Raspberry Pi.
Compatible avec Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
Contenu de l'emballage : 1 onduleur Plus pour Raspberry Pi, 4 piliers en cuivre M2.5, 4 vis M2.5, 4 bâtons longs en cuivre M2.5, 4 écrous M2.5, 1 bouclier en acrylique, 1 mode d'emploi.
Comment utiliser, veuillez vous référer à wiki.52pi.com/index.php?title=EP-0136
45,99 € SUR AMAZON
raspberry pi 4 battery pack
battery raspberry pi
raspberry pi battery
pi 4 raspberry
raspberry 4 pi
raspberry pi 4
raspberry pi 4 4
raspberry pi pico battery
raspberry pi rtc battery
raspberry pi zero battery
#1 GAGNANT
