Waveshare 7
Les 10 meilleurs produits en juillet 2025
Dernière mise à jour :
13 juillet 2025
Waveshare
Waveshare 7 Pouces écran Tactile capacitif IPS LCD HDMI 1024x600 pour Raspberry Pi 3 Model B/Raspberry Pi 3 Model B+/Raspberry Pi 4/BB Black/Windows PC/Various Systems
Livraison gratuite
98
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT
▼ Montrer plus
▲ Montrer moins
If you want to get it faster, please refer to B09XR1VM7H to get the item which will be shipped from Amazon EU Warehouse(which generally can be delivered within 2-3 days). 7inch IPS screen, 1024x600 hardware resolution; Capacitive touch control;Backlight can be turned off to lower power consumption
Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers; When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free; When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free
Note:Please set the config.txt file by adding [hdmi_drive=1] into the end of code if you connect it with raspberry pi. (like manual in picture)Otherwise the LCD could not work properly.
Note:If the LCD work in abnormal states for long time, it may be broken if you don't set the config.txt file at the beginning.After setting config file,please power off the screen and put it aside for a few hours to avoid the flickers.
Note: There is a protective cover on the screen which may remain the scraches after we do the touch test with testing pen,you can peel it off from the green tape on the edge; to use the LCD with following mini-PCs, additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable; BB Black: HDMI cable
59,99 € SUR AMAZON
Waveshare
Waveshare 7 Pouces DSI LCD Écran Tactile 800 × 480 Moniteur pour Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+, Module Affichage TFT Capacitif en Verre Trempé, Jusqu'à 5 Points Tactiles, Luminosité Réglable
Livraison gratuite
96
QUALITÉ SUPÉRIEURE
VOIR SUR AMAZON
Amazon.fr
#2
▼ Montrer plus
▲ Montrer moins
【7" DSI Touch Screen Display】7 inch capacitive touch display for Raspberry Pi, DSI TFT LCD dispaly, 800×480, Resolution
【Device Support】7 inch DSI LCD Display supports Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/4*, working with CM4/3+/3 requires extra adapter board
【System Support】7 inch touch screen monitor supports Raspbian, 5-points touch, driver free; Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free; Supports Retropie, driver free
【Capacitive Touch Control】up to 5-points touch, depending on the operating system
【Adjustable Brightness】Adjustable brightness via software, Low power consumption
68,99 € SUR AMAZON
Waveshare
Waveshare 7inch HDMI Display Capacitive Touch LCD 1024×600 Resolution IPS Screen Latest Version Supports All Versions of Raspberry Pi Windows Monitor
Livraison gratuite
93
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#3
▼ Montrer plus
▲ Montrer moins
👉<b>MULTIPLE APPLICATION</b> Supports all versions of Raspberry Pi. Supports Raspbian, 5-points touch, driver free. Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Supports Retropie, driver free. Supports Windows 11 / 10 / 8.1 / 8 / 7, 5-points touch, driver free.
👉 <b>WIDER VIEWING ANGLE</b> This 7inch IPS Capacitive Touch Screen LCD with 1024×600 Resolution Provides Wider Viewing Angle. VCOM voltage adjustment for optimizing display effect.
👉<b>LOWER POWER CONSUMPTION</b> Backlight adjustment solder pads for PWM signal input, so as to control the backlight brightness, increasing the lifetime of the display and saving power.
👉<b>CAPACITIVE TOUCH</b> Up to 5-points touch, depending on the operating system. USB protocol translator, converting the touch signal into standard multi-points touch protocol to achieve smooth multi-points touch control.
👉<b>PLUG & PLAY</b> This Raspberry Pi touch screen equipped an USB touch port and a HDMI display port. USB and power input solder pads, breakout USB interface, easy for connecting external power supply.
66,49 € SUR AMAZON
Waveshare
Waveshare 7inch Capacitive Touch IPS Display Compatible with Raspberry Pi 5 Pi 4B Pi 3B+/3A+/CM3+/CM3, 1024 x 600 Screen, DSI Interface, Supports Up to 5-Point Touch LCD
Livraison gratuite
89
QUALITÉ DISTINGUÉE
VOIR SUR AMAZON
Amazon.fr
#4
▼ Montrer plus
▲ Montrer moins
Supports Raspberry Pi OS Supports up to 5-point capacitive touch, driver required Support Pi5/4B/CM4/3B+/3A+/3B/CM3+/CM3.(CM3/3+/4 requires extra adapter board)
7inch IPS display with a capacitive touch panel, and its hardware resolution is 1024 x 600.
Toughened glass capacitive touch panel with 6H hardness. Brightness is adjustable by software.
Drive the LCD directly through the DSI interface of the Raspberry Pi, with a refreshing rate of up to 60Hz.
When working with the Raspberry Pi, it supports Bookworm/Bullseye/Buster.
64,99 € SUR AMAZON
Waveshare
Waveshare ESP32-S3 7inch Capacitive Touch LCD Development Board, ESP32 with Display, 800×480, 5-Point Touch, 240MHz, Supports WiFi, Onboard Antenna, Suitable for ESPHome/Home Assistant Project
Livraison gratuite
85
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#5
▼ Montrer plus
▲ Montrer moins
[Dual-core Processor] Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
[Onboard Antenna] Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash
[7inch Capacitive Touch Display] Onboard 7inch capacitive touch display, 800×480 resolution, 65K color. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
[Various Peripheral Interfaces] Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications. Supports flexible clock, module power supply independent setting, and other control to realize low power consumption in different scenarios
[Supports Flexible Clock] Module power supply independent setting, and other control to realize low power consumption in different scenarios
53,99 € SUR AMAZON
Waveshare
Waveshare USB vers Can Adaptateur Analyseur Can Bus Convertisseur Basé sur STM32 Puce, Supportant Windows 11/10/8/7/XP et Raspberry Pi OS/Jetson Nano Ubuntu etc. Systèmes Linux, avec Câble USB
Livraison gratuite
82
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#6
▼ Montrer plus
▲ Montrer moins
USB to CAN Bus adapter analyzer collects data from CAN bus to PC via USB for transceiver control, data analysis, acquisition and monitoring of CAN bus network, supports CAN2.0A (standard frame) and CAN2.0B (extended frame), CAN baud rate is configurable in the range of 5Kbps-1Mbps
USB to CAN converter model support Windows XP/7/8/10/11 and Linux systems such as Raspberry Pi OS and Ubuntu under Jetson Nano, easy secondary development, just need to modify the sending and receiving commands, adopts the original STM32F103 chip, stable and reliable communication
Supports 4 working modes: normal mode, loopback mode, silent mode, silent loopback mode
Supports multiple CAN data sending modes: single frame, multiple frames, manually, regularly and cyclic sending, Supports multiple CAN data receiving modes: can be configured to only receive data from a certain ID, or specify ID to automatically answer the configured data. Data can be saved as TXT or Excel
Supports CAN bus detection for status checking, Sending/receiving CAN data with time scale, allows sequentially displaying, Baud rate of USB virtual COM port is configurable in the range of 9600 ~ 2000000bps (2000000bps by default)
28,99 € SUR AMAZON
Waveshare
Waveshare GamePi20 Accessories Add-ons for Raspberry Pi Zero/Zero W/Zero WH to Build GamePi20 a Mini Retro Video Game Console 2.0inch IPS Display 320x240 Pixels
78
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#7
▼ Montrer plus
▲ Montrer moins
Note: Raspberry Pi and micro SD card are required, if you don't have, please consider the full version: GamePi20.
The GamePi20 is a mini retro video game console based on Raspberry Pi Zero / Zero W / Zero WH, recalls you all the gaming pleasures in the memory.
This accessory pack includes add-ons required to build your own GamePi20, excerpt for the Raspberry Pi and micro SD card.
2.0inch IPS display, 320x240 pixels. Integrates battery charge circuitry, powered from 14500 lithium battery, plays anywhere anytime. Battery life indicator.
Immersion gold process, high quality material, carefully crafted. Onboard speaker and earphone jack, listen to the familiar BGM from the old days.
41,99 € SUR AMAZON
Waveshare
Waveshare 7inch IPS Capacitive Touch Screen with Case 1024x600 Pixel LCD Display with Toughened Glass Cover for Raspberry Pi/PC Windows, Support Software Configurable Resolution (up to 1920x1080)
Livraison gratuite
77
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#8
▼ Montrer plus
▲ Montrer moins
7inch IPS screen,1024x600 hardware resolution, configurable by software (up to 1920x1080)
Toughened glass capacitive touch panel, 6H hardness
Supports popular mini PCs such as Raspberry Pi, Jetson Nano, BB Black, Banana Pi, as well as general desktop computers. When works with Raspberry Pi, Supports Raspbian(5-points touch, driver free) and supports Ubuntu Kali/WIN10 IoT(single point touch, driver free). When work as a computer monitor, supports Windows 10/8.1/8/7(five-points touch, driver free)
Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.
3.5mm audio jack, supports HDMI audio output
79,99 € SUR AMAZON
Waveshare
Waveshare USB to Can Adapter Analyzer, Adopts STM32 Chip Scheme, 4 Working Modes, Stable Communication, for Windows XP/7/8/10/11, for Raspberry Pi OS/Jetson Nano Ubuntu and Other Linux System
Livraison gratuite
71
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#9
▼ Montrer plus
▲ Montrer moins
The data of CAN bus can be collected to the PC via USB to realize the receiving and transmitting control, data analysis, collection and monitoring of the CAN Bus Network
Support CAN2.0A (standard frame) and CAN2.0B (extended frame). Support CAN communication baud rate range: 5kbps~1Mbps, can customize CAN baud rate. Support multiple CAN data receiving methods: it can be configured to receive only the data with the specified ID, or specify the ID to automatically respond to the configured data
Supports 4 Working Modes: normal mode, loopback mode, silent mode, and silent loopback mode. Support multiple CAN data Transmission Modes: single frame transmission, multi frame transmission, manual transmission, timed transmission and cyclic transmission
Adopts the Original STM32F103 Chip, more stable and reliable communication. Support to set the communication baud rate of USB virtual COM port (9600~2000000bps), the default is 2000000bps
Supports Windows XP/7/8/10/11, Compatible with Raspberry Pi OS/Jetson Nano Ubuntu and other Linux Systems, Supports Secondary Development(Just deal with the receiving and sending commands)
29,99 € SUR AMAZON
Waveshare
Waveshare ESP32-S3 7inch Display Development Board, 800×480, 32-bit LX7 Dual-Core Processor, Up to 240MHz Frequency, Supports WiFi & Bluetooth, with Onboard Antenna, No Touch
Livraison gratuite
66
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#10
▼ Montrer plus
▲ Montrer moins
Processor & Performance: Powered by an Xtensa 32-bit LX7 dual-core processor, capable of up to 240MHz, ensuring efficient processing for complex tasks.
Connectivity: Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with an onboard antenna for seamless wireless communication.
Memory & Storage: Comes with 512KB Static RAM, 384KB ROM, 8MB PSRAM, and 8MB Flash, providing ample storage and smooth performance for applications.
Display: Onboard 7inch LCD display, 800×480 resolution, 65K color; Peripheral Interfaces & Power: Includes CAN, RS485, I2C, TF card slot, full-speed USB, and power-saving controls, with flexible clock and independent module power supply for efficient energy management.
Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
51,99 € SUR AMAZON
waveshare ecran 7
waveshare 7.5 inch