Waveshare E Ink
Les 10 meilleurs produits en juillet 2025
Dernière mise à jour :
13 juillet 2025
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Livraison gratuite
98
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT
▼ Montrer plus
▲ Montrer moins
No backlight, keeps displaying last content for a long time even when power down.
Note:V4(the latest version), Please use corresponding demo code verison
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs. Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32). Please contact our 24-hour customer service for relevan
20,59 € SUR AMAZON
Waveshare
Waveshare V4 2.13inch E-Paper Hat+ for Raspberry Pi 5 /for Raspberry Pi Zero 2 W/for Raspberry Pi 3 B/for Raspberry Pi 4B /for Pi Pico W, 250x122, SPI, Hat+ Standard E-Ink Display for pwnagotchi kit
Livraison gratuite
98
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#2
▼ Montrer plus
▲ Montrer moins
2.13″ E-Paper HAT+, compared to the previous Waveshare V2, Waveshare V3 and Waveshare V4 basic versions, this latest V4 version with upgraded HAT+ Standard brings improved interoperability. Support Partial Refresh, Low Power, 170° Wide Viewing Angle, Black and White Color, Paper-Like Effect
With standard Pi 40PIN GPIO Header, compatible With Raspberry Pi Series Boards/Jetson Nano. Onboard high-precision RTC chip for accurate time control. Optimized PCB layout with additional mounting holes for fixing screws
Adopts Immersion Gold process, anti-oxidation and anti-corrosion, enhances soldering performance and improves electrical properties, with better durability and reliability to meet various applications. Thin and light design, compact in Size, more space-saving
Adopts Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
No backlight required, can maintain the display content of the last screen for a long time when powered off. Can provide with online development resources and manual, such as driver board circuit diagram, examples for Raspberry Pi OS/Jetson Nano and can provide pwnagotchi porting tutorial
27,99 € SUR AMAZON
Waveshare
Waveshare 7.5inch E-Paper Display Hat (B) Module 800x480 Resolution 3.3v E-Ink Electronic Screen SPI Interface Red Black White Three-Color for Raspberry Pi Jetson Nano
Livraison gratuite
92
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#3
▼ Montrer plus
▲ Montrer moins
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing. Wide Viewing Angle, Paper-Like Displaying Without Electricity.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs.
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags.
72,99 € SUR AMAZON
Waveshare
Waveshare 2.9 inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Livraison gratuite
88
QUALITÉ DISTINGUÉE
VOIR SUR AMAZON
Amazon.fr
#4
▼ Montrer plus
▲ Montrer moins
This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
24,99 € SUR AMAZON
Waveshare
Waveshare 7.5 inch E-Paper Raw Display Panel V2 800x480 Resolution 3.3V E-Ink Electronic Paper Screen Without PCB with Embedded Controller,Communicating Via SPI Interface
Livraison gratuite
84
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#5
▼ Montrer plus
▲ Montrer moins
Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Ultra low power consumption, basically power is only required for refreshing
Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
67,99 € SUR AMAZON
Waveshare
Waveshare 2.13 inch e-Paper Display Hat V4 250x122 Resolution E-Ink Screen Electronic Paper Module with Embedded Controller SPI Interface for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Livraison gratuite
81
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#6
▼ Montrer plus
▲ Montrer moins
Il s'agit d'un écran E-Ink Hat pour Raspberry Pi, 5,4 cm, 250 x 122 résolution, avec un contrôleur intégré, communique via interface SPI, prend en charge la régénération partielle.
Pas de rétroéclairage, maintient d'afficher du contenu dernière pendant une longue période, même lorsque l'alimentation vers le bas
Ultra faible consommation d'énergie, alimentation est nécessaire uniquement pour la rafraîchissante.
Compatible avec Raspberry Pi 2B/3B/zéro/zéro W, livré avec des ressources de développement et le manuel (exemples pour Raspberry Pi Arduino/stm32). Veuillez contacter notre service à la clientèle 24h / 24 pour obtenir les ressources et manuels pertinents.
préservé solder pads pour interface SPI, le contrôleur pour le raccordement avec d'autres Conseils tels que Arduino/nucleo, etc.
20,59 € SUR AMAZON
Waveshare
Waveshare 1.54 inch E-Paper Display Panel Module V2 Kit 3.3v/5v 200x200 Resolution E-Ink Electronic Screen Partial Refresh for Raspberry Pi/Jetson Nano/Arduino/STM32 with SPI Interface
Livraison gratuite
81
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#7
▼ Montrer plus
▲ Montrer moins
Note:Version 2 please use corresponding demo code
This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/Nucleo, etc.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
19,99 € SUR AMAZON
Waveshare
Waveshare 4.2 inch E-Paper Display Module Kit 400 x 300 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface for Raspberry Pi/Jetson Nano/Arduino,Support Full Refresh
Livraison gratuite
76
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#8
▼ Montrer plus
▲ Montrer moins
This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface.
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down.SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
Ultra low power consumption, basically power is only required for refreshing.
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).Onboard voltage translator, compatible with 3.3V/5V MCUs.
45,99 € SUR AMAZON
Waveshare
Waveshare 7.5 inch E-Paper Display Hat V2 for Home Assistant & ESPHome Projects 800x480 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface for Raspberry Pi/Jetson Nano/STM32
Livraison gratuite
72
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#9
▼ Montrer plus
▲ Montrer moins
This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Note:Version 2 please use corresponding demo code
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32). Compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W,Jetson Nano;SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
69,99 € SUR AMAZON
Waveshare
Waveshare 7.5inch E-Paper Display Hat Module 800×480 E-Ink Electronic Paper Screen for Raspberry Pi/Jetson Nano SPI Interface with ESP32 Driver Board(WiFi/Bluetooth)
Livraison gratuite
67
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#10
▼ Montrer plus
▲ Montrer moins
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Universal e-Paper Driver Board with WiFi / Bluetooth SoC ESP32 onboard, supports various Waveshare SPI e-Paper raw panels
Supports Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image; supports popular image formats: BMP, JPEG, GIF, PNG, etc
Development Resources: www.waveshare.com/wiki/7.5inch_e-Paper_HAT; www.waveshare.com/wiki/e-Paper_ESP32_Driver_Board
72,50 € SUR AMAZON
waveshare e-ink
waveshare e-ink esp32
waveshare e-ink 800x480
e ink
e-ink
e ink reader
e-ink reader
e ink gallery
e ink tag
montre e-ink
#1 GAGNANT
